Concrete Pumping Contractor Casa De Oro-Mount Helix
Indeed, It Can Be Done: Trailer Pump Can Be Used for Concrete Pumping in Casa De Oro-Mount Helix
It seems that people cannot quite agree on many things about concrete pumping in Casa De Oro-Mount Helix, so let us give you an expert’s opinion. To the doubters’ dismay, we have proven otherwise. We made such a practical idea a reality by using the right tools and devising new procedures that we strictly follow.
Before we share how we were able to achieve this, let us to envision a big hose with concrete streaming out towards one end. Knowing how it moves will help you understand how you can use a trailer pump. But what about the rocks mixed with the concrete? In a test, we found out that a lump consisting of three rocks can slide smoothly through a hose with a three-inch diameter together with the portland cement, water and sand.
Ideally, the concrete should be able to pass through the hose without any problem, but there are times when its passage is not that easy due to stumbling blocks along the way. However, it is best to keep in mind that while we leave some space (3/4 inch) for the mix, getting the way around concrete could never be an exact science. Nevertheless, a three-inch hose should work out just fine if the pour is up to 150 feet only. Otherwise, you may want to consider using the large hose. To make sure that the stream of concrete would flow easily, you can use a hose with a diameter of four inches or greater.
As the load becomes heavier, more manpower will be required. Since the hose is larger with a bigger mass of concrete moving through it, the technician holding the nozzle may find it difficult to keep a firm grip on it. In this case, having hooks will be of great help. Getting an extra pair of hands to pull the slack is also beneficial when it comes to weighty setups.
Well, this is why we are here – your reliable big rock concrete pumping contractor, at your service. Our team specializes in providing concrete pumping for big rocks. We have the skills plus the equipment needed to handle your requests. We have a workforce of licensed, experienced and highly skilled technicians who can resolve your problems on the delivery of heavy concrete materials over long distances.
Concrete Pumping in Casa De Oro-Mount Helix Done Professionally
You can use our concrete pumping services for your commercial, residential or industrial projects. We have been in this business for more than 20 years and have trained and developed a core of experts who have mastered various tasks using our trailer pumps. You can make use of our services in a wide range of projects, even the more complex ones. Our services are completely guaranteed, which benefits both of us.
Our technicians have all gone through rigid training and are fully aware of the need to conduct safe practices when it comes to house intels, down-pour pumping, tie beams, sauna tubes, preform columns, ink holes, power jacking, and slabs. Aside from down-pour pumping, our services include setting up house lintels, tie beams, sauna tubes, preform columns, sink holes, power jacking and slabs.
Big Rock Concrete Pumping & Long-distance Projects
As per our standard protocol, we provide our customers with a 200-feet hose. The hose should be enough to cover most types of projects. For larger projects, we can provide up to 1250-feet long hose. We use hydraulic trailer pumps that can fill up to 70 cubic yards of space in an hour.
Retaining Wall
Since day one, we have helped hundreds of project owners build a strong and long-lasting retaining wall. We are well trained to apply waterproofing membrane and install drainage systems on all sizes of retaining walls. Let our structural experts design a retaining wall that fits your needs and your project goals.
Residential Lintel Pumping
When it comes to installing home lintels, you can’t find a more reliable contractor than our team. Lintels are crucial in strengthening both timber and steel frames of doors and other openings, so you can count on us to install the right type of product. We carefully compute the load above the intel to make sure that the structure will not collapse or to prevent physical damages. We also check the brickwork and mortar packing to avoid unnecessary issues. Rest assured that our contractors have all the background and experience required to setup lintels.
Sauna Tubes, Columns, Tie Beams, Precast Columns and Slabs
With the help of our skilled concrete placement specialists, you can install columns, slabs, precast columns or other types of materials inside your commercial or private properties. The best part about our company is that you can achieve the results you want without spending a fortune.
Power Jacking and Sink Holes
The last things you want to deal with are sink holes and air spaces. Voids can cause erosion and severe structural damages. We use very powerful pumps that can achieve 4,000 PSI to fill voids flawlessly. We know how to work on sinkholes and voids underneath office building, roads, parking lots, and slabs. Trust our team to fix your issues quickly.
Hire Our Experts
Our company is everything you need for your concrete pumping needs. We have the proper skills, training and background. We also have advanced equipment to handle any type of situation. At Concrete Pumping Services, you can find skilled workers who can perform your requested services as soon as possible. We guarantee to discuss the procedure we will use to fix your problem. We have a very dedicated team and an extended inventory. Get in touch with our experts today!
Concrete Pumping Services in Casa De Oro-Mount Helix: We’re the Best in the Business
You have come to the right place if you are looking for foolproof solutions for your residential, commercial, or industrial requirements. We, at Concrete Pumping Services, have guaranteed experience in the field, plus our technicians are well-trained and duly certified to perform the task. With regards to concrete pumping, we are simply in a class of our own and nobody can outperform us. Give us a call if there is anything you need which concrete pumping can fulfill, and we will make sure to give you the best service you deserve. This has been our commitment from day one, and up to this very day, we remain true to our word. We would be happy to answer all your inquiries.
Concrete Pumping Service in Casa De Oro-Mount Helix: This Is Our Guarantee
Since we began operation, we have constantly been striving to become the most dependable concrete pumping service provider in the nation. That is why you can always expect top-notch concrete pumping services from us. Besides making sure we invest in the latest technology, we also make it part of our business to equip our personnel with the proper knowledge and skills to carry out their tasks safely and efficiently.
What Can You Expect From Us?
We take pride in having powerful state-of-the-art pumps in the hands of highly trained experts who are able to provide services that will even exceed your expectations. You need not worry about machine breakdowns slowing down your project. We use state of the art equipment, which we always upgrade when necessary to cope with the demands of the project, helping to ensure that the project is completed within the time frame, and not a minute later. Count on us to remain focused on the job at hand, from beginning to end. We have trailer pumps of all kinds, from the likes of Swing, Mayco, Putzmeister, and more. Yes, they are top of the line, and even then we make sure that they are routinely maintained to maximize their efficiency. We also make it a habit to test them out before any project as an added security. In the unlikely event our pumps malfunction (no fret though as this has never happened yet), we have a backup unit readily available so stoppage should not be a concern. By virtue of their extensive experience, our experts have learned to anticipate problems before they actually occur, enabling us to resolve potential problems before they actually show up.
Take comfort in knowing that we come fully insured, which means to say, we have you, and our duly certified personnel, covered by insurance. With all of our company’s positive attributes, you can relax and just let us do our work for you with nothing to worry about.
Pump Concrete with Slabs Using Trailer Pumps
Some people think we’re just boasting when we discuss our use of trailer pumps for delivering concrete to a project site. They can’t seem to understand that this is possible. They say only concrete boom pumps can deal with big rock. Although it is true that boom pumps can do that, these pumps have one noteworthy shortcoming: Their outriggers consume a lot of space.
Our trailer pumps can deliver grout mixed with pea gravel and even bigger stones. They are becoming more popular in the U.S., South America and even Europe. If you do not think that a trailer pump can be used for big rock concrete pumping, then you must reconsider. Many regions of the world, including South America and Europe, are utilizing trailer pumps for their concrete pumping needs.
The Power of Trailer Pump
If you’re remodeling a commercial establishment or a house, trailer pumps are perfect since they can pump up to 300 feet vertically and more than 1,000 feet on a level plane. By and large, they can even achieve volumes of 70 cubic yards per hour. Trailer pump units have slight differences, but they all weigh up to 10,000 pounds and are generally furnished with similar pump kits to boom pumps.
Trailer Pump Advantages
A considerable number of our clients have shifted to using our trailer pumps instead of boom pumps even if they have the space in their project sites for those big machines. They have realized the many benefits offered by trailer pumps. They also leave little waste, their pumping rates are minimal, and they can be located even in cramped spaces. The problem with using a boom pump is that a large part of concrete stays inside the container, leading to major losses.
Large chunks of concrete waste accumulate inside boom pumps, and this waste materials can be very hard to remove. Other than that, it can be very costly to remove the solidified waste materials. On an average, you can expect to pay more or less $160 to clean up boom pumps. This would definitely cost a lot of inconvenience on your part.
If you use a trailer pump, you can expect to save more concrete mixture. This will allow you to save money and resources for your project.
Decision is Up To You
Eventually, the choice is up to you. All pumps nowadays are awesome hardware. Looking back two decades ago, huge strides have been made in their development. The choice may ultimately hinge on whether you want to save money. If that is the case, then the use of trailer pump is your best choice.
Gunite versus Shotcrete
Gunite is a type of construction material used in constructing pools. The material leaves the nozzle as a pressed wet aggregate that sticks to walls.
It is in this technique of application that gunite encounters problems. The quality of the mix depends totally on the accuracy of the onsite operator. There are no mechanical controls or reliable systems to ensure a dependable, long-lasting and correct mix.
This particular step is quite tricky. How good the mixture turns out depends on the skill of the workers. There is no exact formula that will guarantee perfect results. The end result is a pool with weak walls that could collapse due to cracks and leaks. Shotcrete is the answer to your gunite problem.
Unlike the gunite mix, the shotcrete is computer-controlled. The mix is carefully designed and produced in a plant. The application is mostly the same, however. You still have to use a hose and compressor to spray the liquid material to the pool walls and floors.
The strictly regulated production of shotcrete is the reason why the California Division of Transportation has chosen such product in the building of bridges, roads and seismic retrofits. With shotcrete you are guaranteed that the walls of your pool have a constant strength of 3,000 to 4,000 psi, thus preventing leaks and cracks from happening. With shotcrete you are guaranteed that the walls of your pool have a constant strength of 3,000 to 4,000 psi, thus preventing leaks and cracks from happening. With shotcrete, everything is done according to the highest standards. Pools
We are very proficient in creating whatever shape or size of residential swimming pools. Whatever design you have in mind, we can create it for you. Our team has created several pools all over San Diego, California, and all of our past clients were very happy with the end product. Through the years, our company has been using shortcrete to make our clients’ pools, so we know for a fact that this is the best mixture to use.
We have been working with private property owners who subcontract their pool projects to us. At first, they asked for information about the service we provide and inquired about shotcrete. We can provide the necessary recommendations, explain the process and answer any queries concerning the use of shortcrete mixture anytime you want.
Pools have come a long way. Pools without additional features or complicated designs are quite rare these days. If this is the kind of pool you want, then by all means, give us a call. Our company has been keeping up with the major changes. We have learned how to a wide range of pools in the city. Thousands of homeowners trust us for our excellence and our commitment to delivering premium quality results. Drainage Ditches
Drainage ditches are narrow passages dug on the ground with walls lined with three to six inches of shotcrete. A common drainage ditch, called type B ditch, is two-foot wide and one-foot deep. They come in various shapes depending on how much water should pass through them.
The San Diego County Book of Standards features many ditch designs. We can build whatever kind of ditch you need, utilizing our 191Kabota excavator. After digging the ground, our personnel will place either a 6x6x10x10 wire mesh or 17-gauge wire mesh depending on the specified requirements. Our team of workers will then install the 17-gauge wire mesh or the 6x6x10x10 wire mesh based on the plan. They will then spray the shotcrete to finish the job.
Erosion Control
In building ditches, we guarantee that there will be no erosion by ensuring that the slopes are well protected. We do this by applying shotcrete on the walls in differing thickness, even without reinforced steel bars. We also engage in erosion control in basements and underneath houses and other structures to keep water from undermining their foundations. Some slopes are in nearly vertical walls where we apply shotcrete with a rough nozzle finish that conforms to the shape of the slope. We also do erosion control in basements and underneath houses and buildings to prevent water from weakening their foundations. Some slopes comprise of nearly vertical embankments where we place shotcrete with a rough nozzle finish that follows the shapes of the incline. During some instances, we may use techniques used in commercial projects like freeways and bridges for residential projects.
The Gunite and Shotcrete Process
Gunite is a concrete mixture sprayed at a very high velocity. The mixture is made by combining portions of sand and cement. At times we use accelerators to help in overhead placement of shotcrete. The recently developed “Redi-set cement” can also be employed in the shotcreting process.
Guniting and shotcreting are nearly identical. Gunite was first used in the early 1900s. The technique used air pressure to apply mortar on walls, which were thinner than the ones we have now.
On the other hand, shotcrete is a new development based on the same principle as guniting but producing walls of greater thickness with the addition of small coarse aggregates. Two different processes are used—the “wet-mix” and the “dry-mix.” The dry-mix process is generally more effective and the one most commonly used.
Here are the steps involved in the dry mix procedure:
(a) Specific quantities of sand and cement are combined.
(b) The mixture is inserted into an air-pressurized hose which is commonly referred to as the ‘gun’.
(c) The mixture flows through the delivery hose once your turn the feed wheel.
(d) The material is released through the nozzle using compressed air. The nozzle is specially made to fit inside together with the manifold. The perforated material lets the water flow into the nozzle.
(e) The water and dry mixture are thoroughly combined before the resulting mortar is sprayed.
The Wet-mix Procedure
In the wet-mix process, the concrete is blended with water just like in ordinary cement mixing. It is then passed through the conveyance pipeline to the spout, where it is pushed by compressed air at high pressure onto the surface.
The wet-mix process has generally been cast aside in favor of the dry-mix process, because the latter produces much better results. High velocity or low velocity works well in the dry-mix process. The high-velocity gunite, which has a velocity of 90 to 120 meters per second, is produced with the aid of a small nozzle and high pressure. This produces good compaction results. The lower speed gunite, on the other hand, is passed through using a big hose for bigger concrete load yield. The concrete compunction is less under this process.
Advantages and Disadvantages of Wet and Dry Process
A few examples of the pros and cons of using the dry and wet mix procedure are discussed in detail below. Although we can control the water and cement ratio in the wet mix method, it is more recommended to use the dry mix method instead.
Pumping light aggregates is best done using the dry process. It must be noted that the dry mix process is largely dependent on the amount of water mixed with the sand. Sand that is too wet causes blocks inside the pipeline, an issue that does not occur in the wet process.
The fact that the dry process is able to yield a lower water/cement ratio makes the concrete more durable. However, if you are going to use the wet process, in order to achieve roughly the same result, you may use air-entraining agents. With the exception of accelerators, admixtures tend to be more user-friendly.
Nonetheless, air-conveying agents can be used to improve the strength of concrete that passed through the wet process. In general, admixtures can be used more advantageously in the wet process.
Pockets of lean mixture and rebound can occur in the dry process. It is important for the nozzle operator to have a facility where he can put low quality shotcrete that is produced when he is still adjusting the water content or when he is encountering trouble with the equipment.
The personal nuisance and hazards caused by dust in the air during the dry process are experienced less often by technicians during the wet process. However, unlike the dry process, the wet process does not consistently produce compact concrete. Lastly, thanks to the high-powered concrete pumps we have these days, it is now possible to lay concrete at a higher rate when using the wet process compared to the dry process.
Leave a Reply
You must be logged in to post a comment.